Chapter 11. Network Diagnostic Tools

Table of Contents

Various network diagnostic tools are provided by the FB6000, accessible through either the web user interface or the CLI :-

Packet dump : low level diagnostics to for detailed examination of network traffic passing through the FB6000
Ping : standard ICMP echo request/reply ping mechanism
Traceroute : classical traceroute procedure - ICMP echo request packets with increasing TTL values, soliciting "TTL expired" responses from routers along the path
Access check : check whether a specific IP address is allowed to access the various network services described in Chapter 10

Each tool produces a textual result, and can be accessed via the CLI, where the same result text will be shown.

Caution

The diagnostic tools provided are not a substitute for external penetration testing - they are intended to aid understanding of FB6000 configuration, assist in development of your configuration, and for diagnosing problems with the behaviour of the FB6000 itself.

11.1. Access check

For each network service implemented by the FB6000 (see Chapter 10), this command shows whether a specific IP address will be able to access or utilise the service, based on any access restrictions configured on the service.

For example, the following shows some service configurations (expressed in XML), and the access check result when checking access for an external address, 1.2.3.4 :-

  <http local-only="false"/>

Web control page access via http:-
This address is allowed access to web control pages subject to
username/password being allowed.

  <telnet allow="admin-ips"
          local-only="false"/>

Telnet access:-
This address is not allowed access due to the allow list on telnet
service.

(in this example, admin-ips is the name of an IP address group that does not include 1.2.3.4)

  <dns local-only="true"/>

DNS resolver access:-
This address is not on a local Ethernet subnet and so not allowed access.


10.7. SNMP configuration		11.2. Packet Dumping