Appendix H. FireBrick specific SNMP objects

Table of Contents

H.1. BGP information
H.2. L2TP information
H.3. Monitoring information

This appendix details the SNMP objects that are specific to the FireBrick.

H.1. BGP information

Information about specific BGP peers.

Note

The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 6 followed by 32 entries each 0 to 15 for each hex character in the IPv6 address. The IP is the IP of the BGP peer you wish to check. You cannot walk all peers, but can check specific peers by IP address.

Table H.1. iso.3.6.1.4.1.24693.179

...OIDTypeMeaning
IP.1StringName of BGP peer from config
IP.2IntegerState of BGP peer (0=idle, 1=active, 2=openwait, 3=opensent, 4=openconfig, 5=established, 6=closed, 7=free)
IP.3IntegerRemote AS
IP.4IntegerReceived IPv4 prefixes
IP.5IntegerSeconds since last state change
IP.6IntegerReceived IPv6 prefixes