| Chapter 6. Interfaces and Subnets | ||
|---|---|---|
 |  | |
| Chapter 6. Interfaces and Subnets | ||
|---|---|---|
| | | |
Table of Contents
This chapter covers the setup of Ethernet interfaces and the definition of subnets that are present on those interfaces.
For information about other types of 'interfaces', refer to the following chapters :-
The FB2700 features four Gigabit Ethernet (1Gb/s) ports that can also operate at 10Mb/s and 100Mb/s speeds. Auto-negotiation of link speed is enabled by default, so when connected to auto-negotation capable equipment, the ports operate at the highest speed that both ends of the link can run at. In some situations, auto-negotiation is not supported by connected equipment, and so the FB2700 provides control of port behaviour to allow the port to work with such equipment.
Each port features a green and amber LED, the functions of which can be chosen from a range of options indicating link speed and/or traffic activity.
The exact function of the ports is flexible, and controlled by the configuration of the FB2700.
Up to four port groups can be defined, with each group comprising a set of one or more physical ports that doesn't overlap with any other group. The ports within the group work as a conventional Ethernet switch, directly transferring traffic at wire-speed that is destined for a MAC address that is present on one of the other ports in the group.
In the FB2700, an interface is a logical equivalent of a physical Ethernet interface adapter. Each interface normally exists in a distinct broadcast domain, and is associated with at most one port group.
Each port group, which could be a single port, can operate simply as an interface with no VLANs, or can have one or more tagged VLANs which are treated as separate logical interfaces. Using VLAN tags and a VLAN capable switch you can effectively increase the number of physical ports.
If you are unfamiliar with VLANs or the concept of broadcast domains, Appendix D contains a brief overview.
By combining the FB2700 with a VLAN capable switch, using only a single physical connection between the switch and the FB2700, you can effectively expand the number of distinct physical interfaces, with the upper limit on number being determined by switch capabilities, or by inherent IEEE 802.1Q VLAN or FB2700 MAC address block size. An example of such a configuration is a multi-tenant serviced-office environment, where the FB2700 acts as an Internet access router for a number of tenants, firewalling between tenant networks, and maybe providing access to shared resources such as printers.
| | | |
| 5.8. Using Profiles |  | 6.2. Defining port groups |