Appendix I. FireBrick specific SNMP objects

Table of Contents

I.1. BGP information
I.2. IPsec information
I.3. L2TP information
I.4. VoIP information
I.5. CPU usage information
I.6. Running Statistics

This appendix details the SNMP objects that are specific to the FireBrick.

I.1. BGP information

Information about specific BGP peers.

Note

The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 16 followed by 16 entries each 0 to 255 for the bytes in the IPv6 address when represented in net byte order. The IP is the IP of the BGP peer you wish to check.

Table I.1. iso.3.6.1.4.1.24693.179

...OID	Type	Meaning
1.IP	String	Name of BGP peer from config
2.IP	Integer	State of BGP peer (0=idle, 1=active, 2=openwait, 3=opensent, 4=openconfig, 5=established, 6=closed, 7=free)
3.IP	Integer	Remote AS
4.IP	Integer	Received IPv4 prefixes
5.IP	Integer	Seconds since last state change
6.IP	Integer	Received IPv6 prefixes


H.7. Change of Authorisation		I.2. IPsec information