G.2. BGP information

Information about specific BGP peers.

Note

The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 16 followed by 16 entries each 0 to 255 for the bytes in the IPv6 address when represented in net byte order. The IP is the IP of the BGP peer you wish to check.

Table G.2. iso.3.6.1.4.1.24693.179

...OIDTypeMeaning
1.IPStringName of BGP peer from config
2.IPIntegerState of BGP peer (0=idle, 1=active, 2=openwait, 3=opensent, 4=openconfig, 5=established, 6=closed, 7=free)
3.IPIntegerRemote AS
4.IPIntegerReceived IPv4 prefixes
5.IPIntegerSeconds since last state change
6.IPIntegerReceived IPv6 prefixes