Information about specific BGP peers.
Note
The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 6 followed by 32 entries each 0 to 15 for each hex character in the IPv6 address. The IP is the IP of the BGP peer you wish to check.
You cannot walk all peers, but can check specific peers by IP address.
Table G.2. iso.3.6.1.4.1.24693.179
| ...OID | Type | Meaning |
| IP.1 | String | Name of BGP peer from config |
| IP.2 | Integer | State of BGP peer (0=idle, 1=active, 2=openwait, 3=opensent, 4=openconfig, 5=established, 6=closed, 7=free) |
| IP.3 | Integer | Remote AS |
| IP.4 | Integer | Received IPv4 prefixes |
| IP.5 | Integer | Seconds since last state change |
| IP.6 | Integer | Received IPv6 prefixes |
