| M.3. Data types | ||
|---|---|---|
 | Appendix M. Configuration Objects |  |
| M.3. Data types | ||
|---|---|---|
| | Appendix M. Configuration Objects | |
Table M.110. autoloadtype: Type of s/w auto load
| Value | Description |
| false | Do no auto load |
| factory | Load factory releases |
| beta | Load beta test releases |
| alpha | Load test releases |
Table M.111. config-access: Type of access user has to config
| Value | Description |
| none | No access unless explicitly listed |
| view | View only access (no passwords) |
| read | Read only access (with passwords) |
| full | Full view and edit access |
User login level - commands available are restricted according to assigned level.
Table M.112. user-level: User login level
| Value | Description |
| NOBODY | Unknown or not logged in user |
| GUEST | Guest user |
| USER | Normal unprivileged user |
| ADMIN | System administrator |
| DEBUG | System debugger |
Log severity - different loggable events log at different levels.
Table M.115. syslog-severity: Syslog severity
| Value | Description |
| EMERG | System is unstable |
| ALERT | Action must be taken immediately |
| CRIT | Critical conditions |
| ERR | Error conditions |
| WARNING | Warning conditions |
| NOTICE | Normal but significant events |
| INFO | Informational |
| DEBUG | Debug level messages |
| NO-LOGGING | No logging |
Syslog facility, usually used to control which log file the syslog is written to.
Table M.116. syslog-facility: Syslog facility
| Value | Description |
| KERN | Kernel messages |
| USER | User level messges |
| Mail system | |
| DAEMON | System Daemons |
| AUTH | Security/auth |
| SYSLOG | Internal to syslogd |
| LPR | Printer |
| NEWS | News |
| UUCP | UUCP |
| CRON | Cron deamon |
| AUTHPRIV | private security/auth |
| FTP | File transfer |
| 12 | Unused |
| 13 | Unused |
| 14 | Unused |
| 15 | Unused |
| LOCAL0 | Local 0 |
| LOCAL1 | Local 1 |
| LOCAL2 | Local 2 |
| LOCAL3 | Local 3 |
| LOCAL4 | Local 4 |
| LOCAL5 | Local 5 |
| LOCAL6 | Local 6 |
| LOCAL7 | Local 7 |
Table M.117. http-mode: HTTP/HTTPS security mode
| Value | Description |
| http-only | No HTTPS access |
| http+https | Both HTTP and HTTPS access |
| https-only | No HTTP access |
| redirect-to-https | HTTP accesses are redirected to use HTTPS |
| redirect-to-https-if-acme | HTTP accesses are redirected to use HTTPS if ACME set up for hostname |
| redirect-to-https-except-trusted | HTTP accesses are redirected to use HTTPS (except trusted IPs) |
Table M.118. radiuspriority: Options for controlling platform RADIUS response priority tagging
| Value | Description |
| equal | All the same priority |
| strict | In order specified |
| random | Random order |
| calling | Hashed on calling station id |
| called | Hashed on called station id |
| username | Hashed on full username |
| user | Hashed on username before @ |
| realm | Hashed on username after @ |
| prefix | Hashed on username initial letters and numbers only |
Table M.119. radiustype: Type of RADIUS server
| Value | Description |
| authentication | Authentication server |
| accounting | Accounting server |
| control | Allowed to send control (CoA/DM) |
Table M.120. month: Month name (3 letter)
| Value | Description |
| Jan | January |
| Feb | February |
| Mar | March |
| Apr | April |
| May | May |
| Jun | June |
| Jul | July |
| Aug | August |
| Sep | September |
| Oct | October |
| Nov | November |
| Dec | December |
Table M.121. day: Day name (3 letter)
| Value | Description |
| Sun | Sunday |
| Mon | Monday |
| Tue | Tuesday |
| Wed | Wednesday |
| Thu | Thursday |
| Fri | Friday |
| Sat | Saturday |
Table M.122. port: Physical port
| Value | Description |
| 0 | Port 0 (not valid) (deprecated) |
| 1 | Port 1 |
| 2 | Port 2 |
| 3 | Port 3 |
| 4 | Port 4 |
| 5 | Port 5 |
Physical port crossover configuration.
Table M.123. Crossover: Crossover configuration
| Value | Description |
| auto | Crossover is determined automatically |
| MDI | Force no crossover |
Table M.124. LinkSpeed: Physical port speed
| Value | Description |
| 10M | 10Mbit/sec |
| 100M | 100Mbit/sec |
| 1G | 1Gbit/sec |
| auto | Speed determined by autonegotiation |
Table M.125. LinkDuplex: Physical port duplex setting
| Value | Description |
| half | Half-duplex |
| full | Full-duplex |
| auto | Duplex determined by autonegotiation |
Table M.126. LinkFlow: Physical port flow control setting
| Value | Description |
| none | No flow control |
| symmetric | Can support two-way flow control |
| send-pauses | Can send pauses but does not support pause reception |
| any | Can receive pauses and may send pauses if required |
Table M.127. LinkClock: Physical port Gigabit clock master/slave setting
| Value | Description |
| prefer-master | Master status negotiated; preference for master |
| prefer-slave | Master status negotiated; preference for slave |
| force-master | Master status forced |
| force-slave | Slave status forced |
Table M.128. LinkLED: LED settings
| Value | Description |
| Link/Activity | Use settings from link-activity item |
| Off | Permanently off |
| On | Permanently on |
| Flash | Flash |
Table M.129. LinkPower: PHY power saving options
| Value | Description |
| none | No power saving |
| full | Full power saving |
Table M.130. LinkFault: Link fault type to send
| Value | Description |
| false | No fault |
| true | Send fault |
| off-line | Send offline fault (1G) |
| ane | Send ANE fault (1G) |
Table M.132. LEDBlink: LED blink speed
| Value | Description |
| Slow | 2Hz |
| Medium | 4Hz |
| Fast | 8Hz |
| Linkspeed | 10M=2Hz,100M=4Hz,1G=8Hz |
Table M.133. sampling-protocol: Sampling protocol
| Value | Description |
| sflow | Use sFlow protocol |
| ipfix-psamp | Use IPFIX/PSAMP protocol |
| ipfix-legacy | Use legacy (Cisco-style) IPFIX |
Table M.134. trunk-mode: Trunk port mode
| Value | Description |
| false | Not trunking |
| random | Random trunking |
| l2-hash | L2 hashed trunking |
| l23-hash | L2 and L3 hashed trunking |
| l3-hash | L3 hashed trunking |
IPv6 route announcement mode and level
Table M.135. ramode: IPv6 route announce level
| Value | Description |
| false | Do not announce |
| low | Announce as low priority |
| medium | Announce as medium priority |
| high | Announce as high priority |
| true | Announce as default (medium) priority |
Table M.136. dhcpv6control: Control for RA and DHCPv6 bits
| Value | Description |
| false | Don't set bit or answer on DHCPv6 |
| true | Set bit but do not answer on DHCPv6 |
| dhcpv6 | Set bit and do answer on DHCPv6 |
BGP mode defines the default advertisement mode for prefixes, based on well-known community tags
Table M.137. bgpmode: BGP announcement mode
| Value | Description |
| false | Not included in BGP at all |
| no-advertise | Not included in BGP, not advertised at all |
| no-export | Not normally exported from local AS/confederation |
| local-as | Not exported from local AS |
| no-peer | Exported with no-peer community tag |
| true | Exported as normal with no special tags added |
Table M.138. sampling-mode: Sampling mode
| Value | Description |
| off | Don't perform sampling |
| ingress | Sample incoming traffic |
| egress | Sample outgoing traffic |
| both | Sample incoming and outgoing traffic |
Table M.139. sfoption: Source filter option
| Value | Description |
| false | No source filter checks |
| blackhole | Check replies have any valid route |
| true | Check replies down same port/vlan |
Table M.140. pppoe-mode: Type of PPPoE connection
| Value | Description |
| client | Normal PPPoE client connects to access controller |
| bras-l2tp | PPPoE server mode linked to L2TP operation |
Table M.141. pdp-context-type: Type of IP connection
| Value | Description |
| ip | IPv4 only |
| ip6 | IPv6 only |
| ip4ip6 | IPv4/IPv6 dual stack |
| ppp | End to end PPP |
Table M.142. ipsec-type: IPsec encapsulation type
| Value | Description |
| AH | Authentication Header |
| ESP | Encapsulating Security Payload |
Table M.143. ipsec-auth-algorithm: IPsec authentication algorithm
| Value | Description |
| null | No authentication |
| HMAC-MD5 | HMAC-MD5-96 (RFC 2403) |
| HMAC-SHA1 | HMAC-SHA1-96 (RFC 2404) |
| AES-XCBC | AES-XCBC-MAC-96 (RFC 3566) |
| HMAC-SHA256 | HMAC-SHA-256-128 (RFC 4868) |
Table M.144. ipsec-crypt-algorithm: IPsec encryption algorithm
| Value | Description |
| null | No encryption (RFC 2410) |
| 3DES-CBC | 3DES-CBC (RFC 2451) |
| blowfish | Blowfish CBC (RFC 2451) with 16-byte key |
| blowfish-192 | Blowfish CBC (RFC 2451) with 24-byte key |
| blowfish-256 | Blowfish CBC (RFC 2451) with 32-byte key |
| AES-CBC | AES-CBC (Rijndael) (RFC 3602) with 16-byte key |
| AES-192-CBC | AES-CBC (Rijndael) (RFC 3602) with 24-byte key |
| AES-256-CBC | AES-CBC (Rijndael) (RFC 3602) with 32-byte key |
Peer type controls many of the defaults for a peer setting. It allows typical settings to be defined with one attribute that reflects the type of peer.
Table M.145. peertype: BGP peer type
| Value | Description |
| normal | Normal BGP operation |
| transit | EBGP Mark received as no-export |
| peer | EBGP Mark received as no-export, only accept peer AS |
| customer | EBGP Allow export as if confederate, only accept peer AS |
| internal | IBGP allowing own AS |
| reflector | IBGP allowing own AS and working in route reflector mode |
| confederate | EBGP confederate |
| ixp | Internet exchange point peer on route server, soft routes EBGP only |
Table M.146. radius-nas: NAS IP to report
| Value | Description |
| false | Local LNS IP (deprecated) |
| lns | Local LNS IP |
| both | Send NAS IP twice (LAC then LNS) |
| lac | Remote LAC IP |
| true | Remote LAC IP (deprecated) |
Table M.147. ike-authmethod: authentication method
| Value | Description |
| Secret | Shared Secret |
| Certificate | X.509 certificate |
| EAP | Use EAP for authentication |
Table M.148. ike-mode: connection setup mode
| Value | Description |
| Wait | Wait for peer to initiate the connection |
| On-demand | Bring up when needed for traffic |
| Immediate | Always attempt to bring up connection |
Table M.149. ike-PRF: IKE Pseudo-Random Function
| Value | Description |
| HMAC-MD5 | HMAC-MD5 |
| HMAC-SHA1 | HMAC-SHA1 |
| AES-XCBC-128 | AES-XCBC with 128-bit key |
| HMAC-SHA256 | PRF-HMAC-SHA-256 (rfc4868) |
Table M.150. ike-DH: IKE Diffie-Hellman group
| Value | Description |
| none | No D-H negotiation (only used with AH/ESP) |
| MODP-1024 | 1024-bit Sophie Germain Prime MODP Group |
| MODP-2048 | 2048-bit Sophie Germain Prime MODP Group |
Table M.151. ike-ESN: IKE Sequence Number support
| Value | Description |
| ALLOW-ESN | Allow Extended Sequence Numbers (64 bits) |
| ALLOW-SHORT-SN | Allow short sequence numbers (32 bits) |
Table M.152. ipsec-encapsulation: Manually keyed IPsec encapsulation mode
| Value | Description |
| tunnel | IPsec tunnel |
| transport | IPsec transport |
Manual setting control for profile
Table M.153. switch: Profile manual setting
| Value | Description |
| false | Profile set to OFF |
| true | Profile set to ON |
| control-switch | Profile set based on control switch on home page |
Table M.154. dynamic-graph: Type of dynamic graph
| Value | Description |
| false | No dynamic graph |
| ip | Use source IP address |
| mac | Use source MAC address |
Table M.155. firewall-action: Firewall action
| Value | Description |
| continue | Continue rule-set checking |
| accept | Allow but no more rule-set checking |
| reject | End all rule checking now and set to send ICMP reject |
| drop | End all rule checking now and set to drop |
| ignore | End all rule checking and ignore (drop) just this packet, not making a session |
Table M.156. voip-format: Number presentation format
| Value | Description |
| international | Full international number |
| int-no-plus | International without leading plus |
| national | With nat/int prefix |
| local | Local number/extension |
| transparent | Unchanged |
| block | Do not use for calls |
Table M.157. uknumberformat: Number formatting option
| Value | Description |
| false | Don't format numbers for display |
| true | Format numbers for display with spacing |
| replace-zero | Format numbers for display with spacing and replacing zeros - may look clearer on some CLI devices |
Table M.158. recordoption: Recording option
| Value | Description |
| false | Don't automatically record calls |
| in-only | Automatically record incoming calls |
| out-only | Automatically record outgoing calls |
| true | Automatically record all calls |
Table M.159. ring-group-order: Order of ring
| Value | Description |
| strict | Order in config |
| random | Random order |
| cyclic | Cycling from last call |
| oldest | Oldest used phone first |
| |  | |
| M.2. Objects |  | M.4. Basic types |