H.2. L2TP information
Prev Appendix H. FireBrick specific SNMP objects Next

H.2. L2TP information

Information about specific L2TP peers.

Note

The OID contains the IP. This is coded as either 4.a.b.c.d for IPv4 address a.b.c.d, or 6 followed by 32 entries each 0 to 15 for each hex character in the IPv6 address. The IP is the IP of the L2TP peer you wish to check. You cannot walk all peers, but can check specific peers by IP address.

Table H.2. iso.3.6.1.4.1.24693.1701

...OIDTypeMeaning
1.0IntegerNumber of tunnels in FREE state
1.1IntegerNumber of tunnels in OPENING state
1.2IntegerNumber of tunnels in LIVE state
1.3IntegerNumber of tunnels in CLOSING state
1.4IntegerNumber of tunnels in FAILED state
1.5IntegerNumber of tunnels in CLOSED state
2.0IntegerNumber of sessions in FREE state
2.1IntegerNumber of sessions in WAITING state
2.2IntegerNumber of sessions in OPENING state
2.3IntegerNumber of sessions in NEGOTIATING state
2.4IntegerNumber of sessions in AUTH-PENDING state
2.5IntegerNumber of sessions in STARTED state
2.6IntegerNumber of sessions in LIVE state
2.7IntegerNumber of sessions in ACCT-PENDING state
2.8IntegerNumber of sessions in CLOSING state
2.9IntegerNumber of sessions in CLOSED state
IP.1StringThe login name
IP.2StringThe host name
IP.3IntegerNumber of incoming tunnels
IP.4IntegerNumber of outgoing tunnels
IP.5IntegerSeconds since oldest live tunnel connected
IP.6IntegerNumber of live tunnels
IP.7IntegerNumber of sessions

Prev Up Next
Appendix H. FireBrick specific SNMP objects Home H.3. Monitoring information