Chapter 16. Command Line Interface

The FB2500 provides a traditional command-line interface (CLI) environment that can be used to check status information, and control some aspects of the unit's operation.

The CLI is accessed via the 'telnet' protocol - the FB2500 implements a telnet server, which you can connect to using any common telnet client program. To learn how to enable the telnet server, and to set-up access restrictions, please refer to Section 13.2.

Note

The CLI cannot be used to change the configuration of the unit - that must be done via the web interface. However, there are typically a few operations that can only be performed via the CLI.

The CLI has the following features :-

The CLI is documented with reference style material - please refer to Command Line Reference.