FireBrick FB2500 V1.16.001 documentation

Top level config

The top level config element contains all of the FireBrick configuration data.

config: Attributes
Attribute	Type	Description	Default
patch	integer	Internal use, for s/w updates that change config syntax
timestamp	dateTime	Config store time, set automatically when config is saved

config: Elements
Element	Type	Instances	Description
bgp	bgp	Optional, up to 10	BGP config
blackhole	blackhole	Optional, unlimited	Black hole (dropped packets) networks
cqm	cqm	Optional	Constant Quality Monitoring config
ethernet	ethernet	Optional, unlimited	Ethernet port settings
fb105	fb105	Optional, up to 255	FB105 tunnel settings
interface	interface	Optional, up to 8192	Ethernet interface (port-group/vlan) and subnets
ip-group	ip-group	Optional, unlimited	Named IP groups
l2tp	l2tp	Optional	L2TP settings
log	log	Optional, up to 50	Log target controls
loopback	loopback	Optional, unlimited	Extra local addresses
network	network	Optional, unlimited	Locally originated networks
nowhere	blackhole	Optional, unlimited	Dead end (icmp error) networks
ping	ping	Optional, up to 100	Base ping graph settings
port	portdef	Optional, up to 4	Port grouping and naming
ppp	pppoe	Optional, up to 10	PPPoE settings
profile	profile	Optional, unlimited	Control profiles
route	route	Optional, unlimited	Static routes
route-override	route-override	Optional, unlimited	Routing override rules
rule-set	rule-set	Optional, unlimited	Firewall/mapping rules
services	services	Optional	General system services
shaper	shaper	Optional, unlimited	Named traffic shapers
system	system	Optional	System settings
user	user	Optional, unlimited	Admin users
voip	voip	Optional	VoIP config (experimental)

Ring groups

ringgroup: Attributes
Attribute	Type	Description	Default
answer-time	duration	Answer caller if ringing this long	PT30S
comment	string	Comment
ddi	string	Full telephone number
display-name	string	Text name to use
extn	string	Local extension number
limit	unsignedByte	Number allowed to queue
name	string	Group name	Not optional
order	ring-group-order	Order of ring	strict
out-of-hours	List of string	Numbers to ring if out of profile
overflow	List of string	Numbers to ring when more than one call in queue
overflow-time	duration	Include overflow after this time at head of queue	PT30S
pickup-allow	List of string	Only allow pickup from these extensions
profile	string	Profile name
progress-time	duration	Progress to next number after this time	PT6S
redirect	boolean	Allow calls to be diverted before ringing
ring	List of string	Numbers to ring
source	string	Source of data, used in automated config management
type	ring-group-type	Type of ring when one call in queue	all

Tone definitions

Definition of tones used

tone: Attributes
Attribute	Type	Description	Default
name	string	Tone name	Not optional
plan	string	Plan for frequency and duration, e.g. 400ms@400Hz-3dB+450Hz-3dB	Not optional

VoIP telephone authentication user details

VoIP telephone details

telephone: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which registration accepted	Allow from anywhere
carrier	string	Carrier to use for outbound calls
comment	string	Comment
ddi	string	Full telephone number
display-name	string	Text name to use
expires	duration	Registration expiry time	PT1H
extn	string	Local extension number
local-only	boolean	Restrict access to registrations from Ethernet subnets only	true
max-calls	unsignedInt	Maximum simultaneous calls allowed
name	string	User name (local part of 'from')	Not optional
password	Secret	Authentication password
pickup-allow	List of string	Only allow pickup from these extensions
play-tones	boolean	Send in-band tones before clearing
profile	string	Profile name
realm	string	Realm
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0
username	string	Authentication username
wrap-up	duration	Wrap up time before new call

VoIP carrier details

carrier: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which invite accepted	Allow from anywhere
comment	string	Comment
display-name	string	Text name to use
expires	duration	Registration expiry time	PT5M
extn	string	Local number assumed dialled for incoming calls
from	string	From SIP address for outbound registration and invites
incoming-format	voip-format	Dialled number format for incoming calls	national
max-calls	unsignedInt	Maximum simultaneous calls allowed
name	string	Carrier name	Not optional
outgoing-format	voip-format	Dialled number format for outgoing calls	national
password	Secret	Carrier password for outbound registration or inbound authenticated calls
profile	string	Profile name
proxy	string	Carrier hostname or address or calls
registrar	string	Carrier hostname or address or registration
source	string	Source of data, used in automated config management
source-ip	IPAddr	Source IP to use
table	routetable 0-99	Routing table number	0
to	string	To SIP address for inbound invites, may be @domain for any
trust-cli	boolean	Trust inbound calling line identity	true
username	string	Carrier username for outbound registration or inbound authenticated calls
withhold	string	Mark withheld outbound calls using this dial prefix and send CLI in remote party id

Voice over IP config (experimental)

voip: Attributes
Attribute	Type	Description	Default
area-code	string	Local area code (without national prefix)
comment	string	Comment
country	string	Local country code	44
emergency	List of string	Emergency numbers	112 999
international	string	International dialling prefix	00
local-digits	string	Local numbers start with these digits	23456789
local-min-len	unsignedByte	Local numbers min length	5
log	string	Log calls	Not logging
log-blf-debug	string	Log subscribe/notify SIP messages	Not logging
log-debug	string	Log debug and SIP messages	Not logging
log-error	string	Log errors	Log as event
log-register	string	Log registrations	Not logging
log-register-debug	string	Log registration SIP messages	Not logging
national	string	National dialling prefix	0
pickup	string	Call pickup/steal prefix	*
realm	string	Default realm	FireBrick
release	string	CLI release prefix	1470
source	string	Source of data, used in automated config management
withhold	string	CLI withhold prefix	141

voip: Elements
Element	Type	Instances	Description
accounting	radius-acct	Optional, unlimited	RADIUS accounting server settings
carrier	carrier	Optional, up to 200	VoIP carriers
group	ringgroup	Optional, up to 20	Ring groups
registration	radius-auth	Optional, unlimited	RADIUS authentication server settings for registration
routing	radius-auth	Optional, unlimited	RADIUS authentication server settings for call routing
telephone	telephone	Optional, up to 200	VoIP users
tone	tone	Optional, up to 25	Defined tones

Firewall load sharing

Firewall actions for load sharing

session-share: Attributes
Attribute	Type	Description	Default
comment	string	Comment
profile	string	Profile name
set-gateway	IPAddr	New gateway
set-graph	string	Graph name for shaping/logging
set-nat	boolean	Changed source IP and port to local for NAT
set-reverse-graph	string	Graph name for shaping/logging (far side of session)
set-source-ip	IPAddr	New source IP
set-source-port	unsignedShort	New source port
set-table	routetable 0-99	Set new routing table
set-target-ip	IPAddr	New target IP
set-target-port	unsignedShort	New target port
weight	positiveInteger	Weighting of load share	1

Firewall rules

Firewall rule

The individual firewall rules are checked in order within the rule-set, and the first match applied. The default action for a rule is continue, so once matched the next rule-set is considered.

session-rule: Attributes
Attribute	Type	Description	Default
action	firewall-action	Action taken on match	continue
comment	string	Comment
interface	List of string	Source or target interface(s)
ip	List of IPNameRange	Source or target IP address range(s)
log	string	Log session start	As rule-set
log-end	string	Log session end	As rule-set
name	string	Name
profile	string	Profile name
protocol	List of unsignedByte	Protocol(s) [1=ICMP, 6=TCP, 17=UDP]
set-gateway	IPAddr	New gateway
set-graph	string	Graph name for shaping/logging
set-initial-timeout	duration	Initial time-out
set-nat	boolean	Changed source IP and port to local for NAT
set-ongoing-timeout	duration	Ongoing time-out
set-reverse-graph	string	Graph name for shaping/logging (far side of session)
set-source-ip	IPAddr	New source IP
set-source-port	unsignedShort	New source port
set-table	routetable 0-99	Set new routing table
set-target-ip	IPAddr	New target IP
set-target-port	unsignedShort	New target port
source	string	Source of data, used in automated config management
source-interface	List of string	Source interface(s)
source-ip	List of IPNameRange	Source IP address range(s)
source-port	List of PortRange	Source port(s)
target-interface	List of string	Target interface(s)
target-ip	List of IPNameRange	Target IP address range(s)
target-port	List of PortRange	Target port(s)

session-rule: Elements
Element	Type	Instances	Description
share	session-share	Optional, unlimited	Load shared actions

Firewall/mapping rule set

Firewalling rule set with entry criteria and default actions

rule-set: Attributes
Attribute	Type	Description	Default
comment	string	Comment
interface	List of string	Source or target interface(s)
ip	List of IPNameRange	Source or target IP address range(s)
log	string	Log session start	Not logging
log-end	string	Log session end	Not logging
log-no-match	string	Log if no match	log-start
name	string	Name
no-match-action	firewall-action	Default if no rule matches	Not optional
profile	string	Profile name
protocol	List of unsignedByte	Protocol(s) [1=ICMP, 6=TCP, 17=UDP]
source	string	Source of data, used in automated config management
source-interface	List of string	Source interface(s)
source-ip	List of IPNameRange	Source IP address range(s)
source-port	List of PortRange	Source port(s)
table	routetable 0-99	Applicable routing table	0
target-interface	List of string	Target interface(s)
target-ip	List of IPNameRange	Target IP address range(s)
target-port	List of PortRange	Target port(s)

rule-set: Elements
Element	Type	Instances	Description
ip-group	ip-group	Optional, unlimited	Named IP groups
rule	session-rule	Optional, unlimited	Individual rules, first match applies

Route override load sharing

Route override setting for load sharing

session-route-share: Attributes
Attribute	Type	Description	Default
comment	string	Comment
profile	string	Profile name
set-gateway	IPAddr	New gateway
set-graph	string	Graph name for shaping/logging (if not set by rule-set)
set-nat	boolean	Changed source IP and port to local for NAT
weight	positiveInteger	Weighting of load share	1

Routing override rule

session-route-rule: Attributes
Attribute	Type	Description
comment	string	Comment
name	string	Name
profile	string	Profile name
protocol	List of unsignedByte	Protocol(s) [1=ICMP, 6=TCP, 17=UDP]
set-gateway	IPAddr	New gateway
set-graph	string	Graph name for shaping/logging (if not set by rule-set)
set-nat	boolean	Changed source IP and port to local for NAT
source	string	Source of data, used in automated config management
source-interface	List of string	Source interface(s)
source-ip	List of IPNameRange	Source IP address range(s)
source-port	List of PortRange	Source port(s)
target-interface	List of string	Target interface(s)
target-ip	List of IPNameRange	Target IP address range(s)
target-port	List of PortRange	Target port(s)

session-route-rule: Elements
Element	Type	Instances	Description
share	session-route-share	Optional, unlimited	Load shared actions

Routing override rules

route-override: Attributes
Attribute	Type	Description	Default
comment	string	Comment
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Applicable routing table	0

route-override: Elements
Element	Type	Instances	Description
rule	session-route-rule	Optional, unlimited	Individual rules, first match applies

IP Group

Named IP group

ip-group: Attributes
Attribute	Type	Description	Default
comment	string	Comment
ip	List of IPRange	One or more IP ranges or IP/len
name	string	Name	Not optional
source	string	Source of data, used in automated config management
users	List of string	Include IP of (time limited) logged in web users

Traffic shaper override based on profile

Settings for a named traffic shaper

shaper-override: Attributes
Attribute	Type	Description	Default
comment	string	Comment
profile	string	Profile name	Not optional
rx	unsignedInt	Rx rate limit
rx-max	unsignedInt	Rx rate limit max
rx-min	unsignedInt	Rx rate limit min
rx-min-burst	duration	Rx minimum allowed burst time
rx-step	unsignedInt	Rx rate reduction per per hour
source	string	Source of data, used in automated config management
tx	unsignedInt	Tx rate limit/target
tx-max	unsignedInt	Tx rate limit max
tx-min	unsignedInt	Tx rate limit min
tx-min-burst	duration	Tx minimum allowed burst time
tx-step	unsignedInt	Tx rate reduction per hour

Traffic shaper

Settings for a named traffic shaper

shaper: Attributes
Attribute	Type	Description	Default
comment	string	Comment
name	string	Graph name	Not optional
rx	unsignedInt	Rx rate limit
rx-max	unsignedInt	Rx rate limit max
rx-min	unsignedInt	Rx rate limit min
rx-min-burst	duration	Rx minimum allowed burst time
rx-step	unsignedInt	Rx rate reduction per per hour
share	boolean	If shaper is shared with other devices
source	string	Source of data, used in automated config management
tx	unsignedInt	Tx rate limit/target
tx-max	unsignedInt	Tx rate limit max
tx-min	unsignedInt	Tx rate limit min
tx-min-burst	duration	Tx minimum allowed burst time
tx-step	unsignedInt	Tx rate reduction per hour

shaper: Elements
Element	Type	Instances	Description
override	shaper-override	Optional, unlimited	Profile specific variations on main settings

Test passes if any addresses are pingable

Ping targets

profile-ping: Attributes
Attribute	Type	Description	Default
flow	unsignedShort	Flow label (IPv6)
gateway	IPAddr	Ping via specific gateway (bypasses session tracking if set)
ip	IPAddr	Target IP	Not optional
source-ip	IPAddr	Source IP
ttl	unsignedByte	Time to live / Hop limit

Test passes if within any of the date/time ranges specified

Time range test in profiles

profile-time: Attributes
Attribute	Type	Description
days	Set of day	Which days of week apply, default all
start	time	Start (HH:MM:SS)
stop	time	End (HH:MM:SS)

Test passes if within any of the time ranges specified

Time range test in profiles

profile-date: Attributes
Attribute	Type	Description	Default
start	dateTime	Start (YYYY-MM-DDTHH:MM:SS)
stop	dateTime	End (YYYY-MM-DDTHH:MM:SS)

Control profile

General on/off control profile used in various places in the config.

profile: Attributes
Attribute	Type	Description	Default
and	List of string	Test passes if all specified profiles are active
comment	string	Comment
fb105	List of string	FB105 tunnel state (any of these active)
initial	boolean	Defines state at system startup if not using set	true
interval	duration	Test frequency	1
invert	boolean	Invert final result of testing
log	string	Log target	Not logging
log-debug	string	Log additional information	Not logging
name	string	Profile name	Not optional
not	string	Test passes if specified profile is inactive
or	List of string	Active if any of these other profiles active regardless of other tests
ppp	List of string	PPP link state (any of these are up)
recover	duration	Time before recover (i.e. how long test has been passing for)	1
route	List of IPAddr	Test passes if all specified addresses are routeable
set	boolean	Manual override, ignore all tests, ignore invert setting
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table for ping/route
timeout	duration	Time before timeout (i.e. how long test has been failing for)	10
vrrp	List of string	VRRP state (any of these is master)

profile: Elements
Element	Type	Instances	Description
date	profile-date	Optional, unlimited	Test passes if within any date range specified
ping	profile-ping	Optional	Test passes if address is answering pings
time	profile-time	Optional, unlimited	Test passes if within any time range specified

Ping/graph definition

Base ping config - additional ping targets set via web API or other means

ping: Attributes
Attribute	Type	Description	Default
comment	string	Comment
graph	string	Graph name	Not optional
ip	IPNameAddr	Far end IP	Not optional
name	string	Name
size	ping-size 0-1472	Payload size	0
slow	boolean	Slow polling
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number for sending syslogs	0

FB105 routes

Routes for prefixes that are sent to the FB105 tunnel when up

fb105-route: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
ip	List of IPPrefix	One or more local network prefixes	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management

FB105 tunnel definition

fb105: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
fast-udp	boolean	Send UDP packets marked not to be reordered	true
graph	string	Graph name
internal-ip	IP4Addr	Internal IP for traffic originated and sent down tunnel	local-ip
ip	IP4Addr	Far end IP	dynamic tunnel
keep-alive	boolean	Constantly send keep alive packets	true if ip set
local-id	unsignedByte	Unique local end tunnel ID	Not optional
local-ip	IP4Addr	Force specific local end IP
localpref	unsignedInt	Localpref for route (highest wins)	4294967295
log	string	Log events	Not logging
log-error	string	Log errors	Log as event
mtu	unsignedShort	MTU for wrapped packets	1500
name	string	Name
payload-table	routetable 0-99	Routing table number for payload traffic	0
port	unsignedShort	UDP port to use	1
profile	string	Profile name
remote-id	unsignedByte	Unique remote end tunnel ID	Not optional
reorder	boolean	Reorder incoming tunnel packets	false
reorder-maxq	fb105-reorder-maxq 1-100	Max queue length for out of order packets	32
reorder-timeout	fb105-reorder-timeout 10-5000	Max time to delay out of order packet (ms)	100
routes	List of IPPrefix	Routes when link up
secret	Secret	Shared secret for tunnel	Unsigned
set	unsignedByte	Set ID for reorder ID tagging (create a set of tunnels together)
sign-all	boolean	All packets must be signed, not just keepalives	false
source	string	Source of data, used in automated config management
speed	unsignedInt	Egress rate limit used to load balance	no shaping
table	routetable 0-99	Routing table number for tunnel wrappers	0
tcp-mss-fix	boolean	Adjust MSS option in TCP SYN to fix session MSS	true

fb105: Elements
Element	Type	Instances	Description
route	fb105-route	Optional, unlimited	Routes to apply to tunnel when up

RADIUS accounting server settings

Server settings for RADIUS Accounting for L2TP

radius-acct: Attributes
Attribute	Type	Description	Default
attempts	unsignedInt	How many concurrent requests to this server before trying next	200
comment	string	Comment
fail-count	unsignedInt	How many failures in a row before blacklisting	20
fail-time	duration	How long to blacklist before retrying (secs)	120
ip	List of IPAddr	One or more IPs of RADIUS servers (picked at random)	Not optional
name	string	Name
port	unsignedShort	Accounting UDP port	1813
profile	string	Profile name
relay-nas-ip	boolean	Pass remote L2TP endpoint as NAS IP
secret	Secret	Shared secret for RADIUS requests	Not optional
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number
timeout	duration	Min retry timeout on RADIUS requests	5

RADIUS authentication server settings

Server settings for RADIUS Authentication for L2TP

radius-auth: Attributes
Attribute	Type	Description	Default
attempts	unsignedInt	How many concurrent requests to this server before trying next	200
comment	string	Comment
fail-count	unsignedInt	How many failures in a row before blacklisting	20
fail-time	duration	How long to blacklist before retrying (secs)	120
ip	List of IPAddr	One or more IPs of RADIUS servers (picked at random)	Not optional
name	string	Name
port	unsignedShort	Authentication UDP port	1812
profile	string	Profile name
relay-nas-ip	boolean	Pass remote L2TP endpoint as NAS IP
secret	Secret	Shared secret for RADIUS requests	Not optional
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number
timeout	duration	Min retry timeout on RADIUS requests	5

Relay and local authentication rules for L2TP

Rules for relaying L2TP or local authentication

l2tp-relay: Attributes
Attribute	Type	Description	Default
called-station-id	List of string	One or more patterns to match called-station-id
calling-station-id	List of string	One or more patterns to match calling-station-id
comment	string	Comment
graph	string	Graph name
ip-over-lcp	boolean	Send IP over LCP (local auth)
localpref	unsignedInt	Localpref for remote-ip/routes (highest wins)	4294967295
name	string	Name
password	Secret	Password check
profile	string	Profile name
relay-hostname	string	Hostname for L2TP connection
relay-ip	List of IPAddr	Target IP(s) for L2TP connection
relay-secret	Secret	Shared secret for L2TP connection
remote-ip	IP4Addr	Remote end PPP IPv4 (local auth)
remote-netmask	IP4Addr	Remote end PPP Netmask (local auth)
routes	List of IPPrefix	Additional routes when link up (local auth)
source	string	Source of data, used in automated config management
test	List of IPAddr	List of IPs that must have routing for this target to be valid (deprecated)
username	List of string	One or more patterns to match username

L2TP settings for incoming L2TP connections

L2TP tunnel settings for incoming L2TP connections

l2tp-incoming: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which connects can be made
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
damping	boolean	Apply damping to sessions if limiting on shaper	false
dhcpv6dns	List of IP6Addr	List of IPv6 DNS servers
dos-limit	unsignedInt	Per second per session tx packet drop limit for DOS protection	10000
graph	string	Graph name
hdlc	boolean	Send HDLC header (FF03) on all PPP frames	true
hostname	string	Hostname quoted on incoming tunnel
icmp-ppp	boolean	Use PPP endpoint for ICMP	false
ipv6ep	IP4Addr	Local end IPv4 for IPv6 tunnels
lcp-mru-fix	boolean	Restart LCP if RAS negotiated MRU is too high	false
lcp-rate	unsignedByte	LCP interval (seconds)	1
lcp-timeout	unsignedByte	LCP timeout (seconds)	10
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
mtu	mtu 576-1600	Default MTU for sessions in this tunnel
name	string	Name
payload-table	routetable 0-99	Routing table number for payload traffic	0
pppdns1	IP4Addr	PPP DNS1 IPv4 default
pppdns2	IP4Addr	PPP DNS2 IPv4 default
pppip	IP4Addr	Local end PPP IPv4
profile	string	Profile name
require-platform	boolean	All sessions require a platform RADIUS first	false
secret	Secret	Shared secret
shutdown	boolean	Refuse all new sessions or tunnels	false
source	string	Source of data, used in automated config management
speed	unsignedInt	Default egress rate limit
table	routetable 0-99	Routing table number for L2TP session	0
tcp-mss-fix	boolean	Adjust MSS option in TCP SYN to fix session MSS	false
test	List of IPAddr	List of IPs to which routing must exist else tunnel dropped (deprecated)

l2tp-incoming: Elements
Element	Type	Instances	Description
match	l2tp-relay	Optional, unlimited	Rules for relaying connections and local authentication

L2TP settings for outgoing L2TP connections

L2TP tunnel settings for outgoing L2TP connections

l2tp-outgoing: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
called	string	called-station-idi to send
calling	string	calling-station-id to send
comment	string	Comment
graph	string	Graph name
hdlc	boolean	Send HDLC header (FF03) on all PPP frames	true
hostname	string	Hostname quoted on incoming tunnel
ip	IPAddr	IP of far end	Not optional
lcp-rate	unsignedByte	LCP interval (seconds)	10
lcp-timeout	unsignedByte	LCP timeout (seconds)	61
local	IP4Addr	Local IPv4 address
localpref	unsignedInt	Localpref for remote-ip/routes (highest wins)	4294967295
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
min-retry	duration	Minimum session time before retrying connection	10
mtu	mtu 576-1600	Default MTU for sessions in this tunnel
name	string	Name
password	Secret	Password for login
payload-table	routetable 0-99	Routing table number for payload traffic	0
profile	string	Profile name
remote	IP4Addr	Remote IPv4 address
routes	List of IPPrefix	Routes when link up	Default gateway
rx-speed	unsignedInt	Send ingress rate
secret	Secret	Shared secret
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number for L2TP session	0
tcp-mss-fix	boolean	Adjust MSS option in TCP SYN to fix session MSS	false
tx-speed	unsignedInt	Egress rate limit
username	string	User name for login

l2tp-outgoing: Elements
Element	Type	Instances	Description
route	ppp-route	Optional, unlimited	Routes to apply when link is up

L2TP settings

L2TP settings for incoming and outgoing L2TP connections

l2tp: Attributes
Attribute	Type	Description	Default
accounting-interval	duration	Periodic interim accounting interval	3600

l2tp: Elements
Element	Type	Instances	Description
accounting	radius-acct	Optional, unlimited	RADIUS accounting server settings
authentication	radius-auth	Optional, unlimited	RADIUS authentication server settings
incoming	l2tp-incoming	Optional, unlimited	Incoming L2TP connections
outgoing	l2tp-outgoing	Optional, unlimited	Outgoing L2TP connections

Constant Quality Monitoring settings

Constant quality monitoring (graphs and data) have a number of settings. Most of the graphing settings can be overridden when a graph is collected so these define the defaults in many cases.

cqm: Attributes
Attribute	Type	Description	Default
ave	Colour	Colour for average latency	#0cc
axis	Colour	Axis colour	black
background	Colour	Background colour	white
bottom	unsignedByte	Pixels space at bottom of graph	11
dateformat	string	Date format	%Y-%m-%d
dayformat	string	Day format	%a
fail	Colour	Colour for failed (dropped) seconds	red
fail-level	unsignedInt	Fail level not expected on low usage	1
fail-level1	unsignedByte	Loss level 1	3
fail-level2	unsignedByte	Loss level 2	50
fail-score	unsignedByte	Score for fail and low usage	200
fail-score1	unsignedByte	Score for on/above level 1	100
fail-score2	unsignedByte	Score for on/above level 2	200
fail-usage	unsignedInt	Usage below which fail is not expected	128000
fblogo	Colour	Colour for logo	#c00
graticule	Colour	Graticule colour	grey
heading	string	Heading of graph
hourformat	string	Hour format	%H
key	unsignedByte	Pixels space for key	90
label-ave	string	Label for average latency	Ave
label-damp	string	Label for % shaper damping	Damp%
label-fail	string	Label for seconds (%) failed	Fail
label-latency	string	Label for latency	Latency
label-max	string	Label for maximum latency	Max
label-min	string	Label for minimum latency	Min
label-off	string	Label for off line seconds	Off
label-period	string	Label for period	Period
label-poll	string	Label for polls	Polls
label-rx	string	Label for Rx traffic level	Rx
label-score	string	Label for score	Score
label-sent	string	Label for seconds polled	Sent
label-shaper	string	Label for shaper	Shaper
label-time	string	Label for time	Time
label-traffic	string	Label for traffic level	Traffic (bit/s)
label-tx	string	Label for Tx traffic level	Tx
latency-level	unsignedInt	Latency level not expected on low usage	100000000
latency-level1	unsignedInt	Latency level 1 (ns)	100000000
latency-level2	unsignedInt	Latency level 2 (ns)	500000000
latency-score	unsignedByte	Score for high latency and low usage	200
latency-score1	unsignedByte	Score for on/above level 1	10
latency-score2	unsignedByte	Score for on/above level 2	20
latency-usage	unsignedInt	Usage below which latency is not expected	128000
left	unsignedByte	Pixels space left of main graph	0
log	string	Log events	Not logging
max	Colour	Colour for maximum latency	green
min	Colour	Colour for minimum latency	blue
off	Colour	Colour for off line seconds	#c8f
outside	Colour	Colour for outer border	transparent
right	unsignedByte	Pixels space right of main graph	50
rx	Colour	Colour for Rx traffic level	#800
secret	Secret	Secret for MD5 coded URLs
sent	Colour	Colour for polled seconds	#ff8
share-interface	string	Interface on which to broadcast data for shaper sharing
share-secret	string	Secret to validate shaper sharing
subheading	string	Subheading of graph
text	Colour	Colour for text	black
text1	string	Text line 1
text2	string	Text line 2
text3	string	Text line 3
text4	string	Text line 4
timeformat	string	Time format	%Y-%m-%d %H:%M:%S
top	unsignedByte	Pixels space at top of graph	4
tx	Colour	Colour for Tx traffic level	#080

Individual mapping/filtering rule

An individual rule for BGP mapping/filtering

bgprule: Attributes
Attribute	Type	Description	Default
comment	string	Comment
detag	List of Community	List of community tags to remove
drop	boolean	Do not import/export this prefix	false
localpref	unsignedInt	Set localpref (highest wins)
med	unsignedInt	Set MED
name	string	Name
prefix	List of IPFilter	Prefixes that this rule applies to
source	string	Source of data, used in automated config management
tag	List of Community	List of community tags to add

Mapping and filtering rules of BGP prefixes

This defines the rules for mapping and filtering of prefixes to/from a BGP peer.

bgpmap: Attributes
Attribute	Type	Description	Default
comment	string	Comment
detag	List of Community	List of community tags to remove
drop	boolean	Do not import/export this prefix	false
localpref	unsignedInt	Set localpref (highest wins)
med	unsignedInt	Set MED
name	string	Name
prefix	List of IPFilter	Drop all that are not in this prefix list
source	string	Source of data, used in automated config management
tag	List of Community	List of community tags to add

bgpmap: Elements
Element	Type	Instances	Description
match	bgprule	Optional, unlimited	List rules, in order of checking

The peer definition specifies the attributes of an individual peer. Multiple IP addresses can be specified, typically for IPv4 and IPv6 addresses for the same peer, but this can be used for a group of similar peers.

bgppeer: Attributes
Attribute	Type	Description	Default
add-own-as	boolean	Add our AS on exported routes
allow-export	boolean	Ignore no-export community and export anyway
allow-only-their-as	boolean	Only accept routes that are solely the peers AS
allow-own-as	boolean	Allow our AS inbound
as	unsignedInt	Peer AS
capability-as4	boolean	If supporting AS4	true
capability-graceful-restart	boolean	If supporting Graceful Restart	true
capability-mpe-ipv4	boolean	If supporting MPE for IPv4	true
capability-mpe-ipv6	boolean	If supporting MPE for IPv6	true
capability-route-refresh	boolean	If supporting Route Refresh	true
comment	string	Comment
drop-default	boolean	Ignore default route received	false
export-med	unsignedInt	Set MED on exported routes (unless export filter sets it)
holdtime	unsignedInt	Hold time	30
ignore-bad-optional-partial	boolean	Ignore routes with a recognised badly formed optional that is flagged partial	true
import-localpref	unsignedInt	Set localpref on imported routes (unless import filter sets it)
in-soft	boolean	Mark received routes as soft
ip	List of IPAddr	One or more IPs of neighbours (omit to allow incoming)
log-debug	string	Log debug	Not logging
max-prefix	bgp-prefix-limit 1-1000	Limit prefixes (IPv4+IPv6)	10000
md5	Secret	MD5 signing secret
name	string	Name
next-hop-self	boolean	Force us as next hop outbound	false
no-fib	boolean	Don't include received routes in packet forwarding
pad	unsignedByte	Pad (prefix stuff) our AS by this many
profile	string	Profile name
same-ip-type	boolean	Only accept/send IPv4 routes to IPv4 peers and IPv6 routes to IPv6 peers	true
send-default	boolean	Send a default route to this peer	false
send-no-routes	boolean	Don't send any normal routes	false
shutdown	boolean	Shutdown this neighbour (deprecated, use profile)
source	string	Source of data, used in automated config management
timer-idle	unsignedInt	Idle time after error	60
timer-openwait	unsignedInt	Time to wait for OPEN on connection	10
timer-retry	unsignedInt	Time to retry the neighbour	10
ttl-security	byte	Enable RFC5082 TTL security (if +ve, 1 to 127), i.e. 1 for adjacent router. If -ve (-1 to -128) set forced sending TTL, i.e. -1 for TTL of 1 sending, and not checking.
type	peertype	Type of neighbour (affects some defaults)	normal

bgppeer: Elements
Element	Type	Instances	Description
export	bgpmap	Optional, unlimited	Mapping and filtering rules of announcing prefixes to peer
import	bgpmap	Optional, unlimited	Mapping and filtering rules of accepting prefixes from peer

Overall BGP settings

The BGP element defines general BGP settings and a list of peer definitions for the individual BGP peers.

bgp: Attributes
Attribute	Type	Description	Default
as	unsignedInt	Our AS
cluster-id	IP4Addr	Our cluster ID
comment	string	Comment
id	IP4Addr	Our router ID
log	string	Log events	Not logging
name	string	Name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

bgp: Elements
Element	Type	Instances	Description
peer	bgppeer	Optional, up to 50	List of peers/neighbours

Locally originated networks

Loopback addresses define local IP addresses

loopback: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
ip	List of IPAddr	One or more local network addresses	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

Dead end networks

Networks that go nowhere

blackhole: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes	false
comment	string	Comment
ip	List of IPPrefix	One or more local network prefixes	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

Locally originated networks

Network blocks that are announced but not actually added to internal routes - note that blackhole and nowhere objects can also announce but add routing.

network: Attributes
Attribute	Type	Description	Default
as-path	List of up to 10 unsignedInt	Custom AS path as if network received
bgp	bgpmode	BGP announce mode for routes	true
comment	string	Comment
ip	List of IPPrefix	One or more local network prefixes	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

Static routes

Static routes define prefixes which are permanently in the routing table, and whether these should be announced by routing protocols or not.

route: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
gateway	List of IPAddr	One or more target gateway IPs	Not optional
graph	string	Graph name
ip	List of IPPrefix	One or more local network prefixes	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management
speed	unsignedInt	Egress rate limit
table	routetable 0-99	Routing table number	0

PPP routes

Routes that apply when link is up

ppp-route: Attributes
Attribute	Type	Description	Default
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
ip	List of IPPrefix	One or more local network prefixes	Not optional
localpref	unsignedInt	Localpref of network (highest wins)	4294967295
name	string	Name
profile	string	Profile name
source	string	Source of data, used in automated config management

PPPoE settings

PPPoE endpoint settings

pppoe: Attributes
Attribute	Type	Description	Default
ac-name	string	Access concentrator name	Any a/c name
accept-dns	boolean	Accept DNS servers specified by far end	true
bgp	bgpmode	BGP announce mode for routes
comment	string	Comment
graph	string	Graph name
ip-over-lcp	boolean	Sends all IP packets as LCP	auto
lcp-rate	unsignedByte	LCP interval (seconds)	10
lcp-timeout	unsignedByte	LCP timeout (seconds)	61
local	IP4Addr	Local IPv4 address
localpref	unsignedInt	Localpref for route (highest wins)	4294967295
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log as events	Not logging
mode	pppoe-mode	PPPoE server/client mode	client
mtu	mtu 576-1600	MTU for link	1492
name	string	Name
nat	boolean	NAT traffic to this link unless otherwise set	false
password	Secret	User password
pd-interface	List of string	Interfaces for IPv6 prefix delegation	Auto
port	string	Physical port number, or port group name
profile	string	Profile name
remote	IP4Addr	Remote IPv4 address
routes	List of IPPrefix	Routes when link up	Default gateway
service	string	Service name	Any service
source	string	Source of data, used in automated config management
speed	unsignedInt	Default egress rate limit
table	routetable 0-99	Routing table number for payload	From interface
tcp-mss-fix	boolean	Adjust MSS option in TCP SYN to fix session MSS	true
username	string	User name
vlan	vlan 0-4095	VLAN ID (0=untagged)	0

pppoe: Elements
Element	Type	Instances	Description
route	ppp-route	Optional, unlimited	Routes to apply when ppp link is up

DHCP server attributes (IP)

Additional DHCP server attributes (IP)

dhcp-attr-ip: Attributes
Attribute	Type	Description	Default
comment	string	Comment
force	boolean	Send even if not requested
id	unsignedByte	Attribute type code	Not optional
name	string	Name
value	IP4Addr	Value	Not optional

DHCP server attributes (numeric)

Additional DHCP server attributes (numeric)

dhcp-attr-number: Attributes
Attribute	Type	Description	Default
comment	string	Comment
force	boolean	Send even if not requested
id	unsignedByte	Attribute type code	Not optional
name	string	Name
value	unsignedInt	Value	Not optional

DHCP server attributes (string)

Additional DHCP server attributes (string)

dhcp-attr-string: Attributes
Attribute	Type	Description	Default
comment	string	Comment
force	boolean	Send even if not requested
id	unsignedByte	Attribute type code	Not optional
name	string	Name
value	string	Value	Not optional

DHCP server attributes (hex)

Additional DHCP server attributes (hex)

dhcp-attr-hex: Attributes
Attribute	Type	Description	Default
comment	string	Comment
force	boolean	Send even if not requested
id	unsignedByte	Attribute type code	Not optional
name	string	Name
value	hexBinary	Value	Not optional

DHCP server settings

Settings for DHCP server

dhcps: Attributes
Attribute	Type	Description	Default
boot	IP4Addr	Next/boot server
boot-file	string	Boot filename
class	string	CLass match
client-name	string	Client name match
comment	string	Comment
dns	List of IP4Addr	DNS resolvers	Our IP
domain	string	DNS domain	From system settings
force	boolean	Send all options ever if not requested
gateway	List of IP4Addr	Gateway	Our IP
ip	List of IP4Range	Address pool	0.0.0.0/0
lease	duration	Lease length	PT2H
log	string	Log events (allocations)	Not logging
mac	List of up to 12 macprefix (hexBinary)	Partial or full MAC addresses
name	string	Name
ntp	List of IP4Addr	NTP server	From system settings
profile	string	Profile name
source	string	Source of data, used in automated config management
syslog	List of IP4Addr	Syslog server
time	List of IP4Addr	Time server	Our IP

dhcps: Elements
Element	Type	Instances	Description
send	dhcp-attr-hex	Optional, unlimited	Additional attributes to send (hex)
send-ip	dhcp-attr-ip	Optional, unlimited	Additional attributes to send (IP)
send-number	dhcp-attr-number	Optional, unlimited	Additional attributes to send (numeric)
send-string	dhcp-attr-string	Optional, unlimited	Additional attributes to send (string)

VRRP settings

VRRP settings provide virtual router redundancy for the FireBrick. Profile inactive does not disable vrrp but forces vrrp low priority.

vrrp: Attributes
Attribute	Type	Description	Default
answer-ping	boolean	Whether to answer PING to VRRP IPs when master	true
comment	string	Comment
delay	unsignedInt	Delay after routing established before priority returns to normal	10
interval	unsignedShort	Transit interval (centiseconds)	100
ip	List of IPAddr	One or more IP addresses to announce	Not optional
log	string	Log events	Not logging
log-error	string	Log errors	log as event
low-priority	unsignedByte	Lower priority applicable until routing established	1
name	string	Name
preempt	boolean	Whether pre-empt allowed	true
priority	unsignedByte	Normal priority	100
profile	string	Profile name
source	string	Source of data, used in automated config management
test	List of IPAddr	List of IPs to which routing must exist else low priority (deprecated)
use-vmac	boolean	Whether to use the special VMAC or use normal MAC	true
version3	boolean	Use only version 3	v2 for IPv4, v3 for IPv6
vrid	unsignedByte	VRID	42

Subnet settings

Subnet settings define the IP address(es) of the FireBrick, and also allow default routes to be set.

subnet: Attributes
Attribute	Type	Description	Default
accept-dns	boolean	Accept DNS servers specified by DHCP	true
arp-timeout	unsignedShort	Max lifetime on ARP and ND	60
bgp	bgpmode	BGP announce mode for routes
broadcast	boolean	If broadcast address allowed	false
comment	string	Comment
gateway	List of IPAddr	One or more gateways to install
ip	List of IPSubnet	One or more IP/len	Automatic by DHCP
localpref	unsignedInt	Localpref for subnet (highest wins)	4294967295
mtu	mtu 576-1600	MTU for subnet	As interface
name	string	Name
nat	boolean	Short cut to set nat default mode on all IPv4 traffic from subnet (can be overridden by firewall rules)	false
profile	string	Profile name
proxy-arp	boolean	Answer ARP/ND by proxy if we have routing	false
ra	ramode	If to announce IPv6 RA for this subnet	false
ra-dns	List of IP6Addr	List of recursive DNS servers in route announcements
ra-managed	dhcpv6control	RA 'M' (managed) flag
ra-max	ra-max 4-1800	Max RA send interval	600
ra-min	ra-min 3-1350	Min RA send interval
ra-mtu	unsignedShort	MTU to use on RA	As subnet
ra-other	dhcpv6control	RA 'O' (other) flag
ra-profile	string	Profile, if inactive then forces low priority RA
source	string	Source of data, used in automated config management
ttl	unsignedByte	TTL for originating traffic via subnet	64

Port-group/VLAN interface settings

The interface definition relates to a specific physical port group and VLAN. It includes subnets and VRRP that apply to that interface.

interface: Attributes
Attribute	Type	Description	Default
comment	string	Comment
graph	string	Graph name
log	string	Log events including DHCP and related events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
mtu	mtu 576-1600	MTU for this interface	1500
name	string	Name
ping	IPAddr	Ping address to add loss/latency to graph for interface
port	string	Port group name	Not optional
profile	string	Profile name
ra-client	boolean	Accept IPv6 RA and create auto config subnets and routes	true
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table applicable	0
vlan	vlan 0-4095	VLAN ID (0=untagged)	0

interface: Elements
Element	Type	Instances	Description
dhcp	dhcps	Optional, unlimited	DHCP server settings
subnet	subnet	Optional, unlimited	IP subnet on the interface
vrrp	vrrp	Optional, unlimited	VRRP settings

Port grouping and naming

portdef: Attributes
Attribute	Type	Description	Default
comment	string	Comment
name	string	Name	Not optional
ports	Set of port	Physical port(s)	Not optional
profile	string	Profile name
source	string	Source of data, used in automated config management

Physical port controls

Physical port attributes

ethernet: Attributes
Attribute	Type	Description	Default
autoneg	boolean	Perform link auto-negotiation	auto negotiate unless manual 10/100 speed and duplex are set
clocking	LinkClock	Gigabit clock setting	prefer-slave
crossover	Crossover	Port crossover configuration	auto
duplex	LinkDuplex	Duplex setting for this port	auto
flow	LinkFlow	Flow control setting	none
green	LinkLED	Green LED setting	Link/Activity
optimise	boolean	enable PHY optimisations	true
port	port	Physical port	Not optional
power-saving	LinkPower	enable PHY power saving	full
send-fault	LinkFault	Send fault status
shutdown	boolean	Power down this port	false
speed	LinkSpeed	Speed setting for this port	auto
yellow	LinkLED	Yellow LED setting	Tx

Matching rules for platform RADIUS

Rules for matching RADIUS requests

platform-radius-match: Attributes
Attribute	Type	Description	Default
backup-ip	List of IPNameAddr	Target IP(s) or hostname for backup L2TP connection
called-station-id	List of string	One or more patterns to match called-station-id
calling-station-id	List of string	One or more patterns to match calling-station-id
class	string	Class field to send
comment	string	Comment
context-name	string	Juniper Context-Name (SIN502)
dummy-ip	boolean	Send dummy framed IP response	true
name	string	Name
nsn-conditional	boolean	Only send NSN settings if username is not same as calling station id
nsn-tunnel-override-username	unsignedByte	Additional response for GGSN usage
nsn-tunnel-user-auth-method	unsignedInt	Additional response for GGSN usage
order	radiuspriority	Priority tagging of endpoints sent
profile	string	Profile name
relay-ip	List of IPAddr	Address to copy RADIUS request
relay-port	unsignedShort	Authentication UDP port for copy RADIUS request	1812
relay-table	routetable 0-99	Routing table number for copy of RADIUS request
source	string	Source of data, used in automated config management
tagged	boolean	Tag all attributes that can be
target-hostname	string	Hostname for L2TP connection
target-ip	List of IPNameAddr	Target IP(s) or hostname for primary L2TP connection
target-secret	Secret	Shared secret for L2TP connection
test	List of IPAddr	List of IPs that must have routing for this target to be valid (deprecated)
tunnel-assignment-id	string	Tunnel Assignment ID to send
tunnel-client-return	boolean	Return tunnel client as radius IP
username	List of string	One or more patterns to match username

Platform RADIUS definition

Platform RADIUS server and proxy definitions

platform-radius: Attributes
Attribute	Type	Description	Default
acct-port	unsignedShort	Accounting UDP port	1813
backup-ip	List of IPNameAddr	Target IP(s) or hostname for backup L2TP connection
class	string	Class field to send
comment	string	Comment
context-name	string	Juniper Context-Name (SIN502)
dummy-ip	boolean	Send dummy framed IP response	true
log	string	Log events	Not logging
log-error	string	Log errors	Log as event
name	string	Name
nsn-conditional	boolean	Only send NSN settings if username is not same as calling station id
nsn-tunnel-override-username	unsignedByte	Additional response for GGSN usage
nsn-tunnel-user-auth-method	unsignedInt	Additional response for GGSN usage
order	radiuspriority	Priority tagging of endpoints sent
port	unsignedShort	Authentication UDP port	1812
profile	string	Profile name
relay-ip	List of IPAddr	Address to copy RADIUS request
relay-port	unsignedShort	Authentication UDP port for copy RADIUS request	1812
relay-table	routetable 0-99	Routing table number for copy of RADIUS request
secret	Secret	Shared secret for RADIUS requests (needed for replies)
source	string	Source of data, used in automated config management
tagged	boolean	Tag all attributes that can be
target-hostname	string	Hostname for L2TP connection
target-ip	List of IPNameAddr	Target IP(s) or hostname for primary L2TP connection
target-secret	Secret	Shared secret for L2TP connection
test	List of IPAddr	List of IPs that must have routing for this target to be valid (deprecated)
tunnel-assignment-id	string	Tunnel Assignment ID to send
tunnel-client-return	boolean	Return tunnel client as radius IP

platform-radius: Elements
Element	Type	Instances	Description
match	platform-radius-match	Optional, unlimited	Matching rules for specific responses

Fixed local DNS blocks

DNS forwarding resolver service

dns-block: Attributes
Attribute	Type	Description	Default
comment	string	Comment
name	List of string	Host names (can use * as a part of a domain)	Not optional
profile	string	Profile name
restrict	List of IPNameRange	List of IP ranges to which this is served
source	string	Source of data, used in automated config management
ttl	unsignedInt	Time to live	60

Fixed local DNS host settings

DNS forwarding resolver service

dns-host: Attributes
Attribute	Type	Description	Default
comment	string	Comment
ip	List of IPAddr	IP addresses to serve (or our IP if omitted)	Our IP
name	List of string	Host names (can use * as a part of a domain)	Not optional
profile	string	Profile name
restrict	List of IPNameRange	List of IP ranges to which this is served
reverse	boolean	Map reverse DNS as well
source	string	Source of data, used in automated config management
ttl	unsignedInt	Time to live	60

DNS service settings

DNS forwarding resolver service

dns-service: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which service can be accessed	Allow from anywhere
auto-dhcp	boolean	Forward and reverse DNS for names in DHCP using this domain
comment	string	Comment
domain	string	Our domain
local-only	boolean	Restrict access to locally connected Ethernet subnets only	true
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
profile	string	Profile name
resolvers	List of IPAddr	Recursive DNS resolvers to use
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

dns-service: Elements
Element	Type	Instances	Description
block	dns-block	Optional, unlimited	Fixed local DNS host blocks
host	dns-host	Optional, unlimited	Fixed local DNS host entries

HTTP service settings

Web management pages

http-service: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which service can be accessed	Allow from anywhere
comment	string	Comment
local-only	boolean	Restrict access to locally connected Ethernet subnets only	false
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
port	unsignedShort	Service port	80
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0
trusted	List of IPNameRange	List of allowed IP ranges from which additional access to certain functions is available

Telnet service settings

Telnet control interface

telnet-service: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which service can be accessed	Allow from anywhere
comment	string	Comment
local-only	boolean	Restrict access to locally connected Ethernet subnets only	true
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
port	unsignedShort	Service port	23
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

NTP service settings

The NTP settings define how the system clock is set, from what servers, and controls for daylight saving (summer time). The defaults are those that apply to the EU

ntp-service: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which service can be accessed	Allow from anywhere
comment	string	Comment
local-only	boolean	Restrict access to locally connected Ethernet subnets only	true
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0
timeserver	List of IPNameAddr	List of time servers (IP or hostname) from which time may be set by ntp
tz1-name	string	Timezone 1 name	GMT
tz1-offset	duration	Timezone 1 offset from UTC	00:00:00
tz12-date	datenum 1-31	Timezone 1 to 2 earliest date in month	25
tz12-day	day	Timezone 1 to 2 day of week of change	Sun
tz12-month	month	Timezone 1 to 2 month	Mar
tz12-time	duration	Timezone 1 to 2 local time of change	01:00:00
tz2-name	string	Timezone 2 name	BST
tz2-offset	duration	Timezone 2 offset from UTC	01:00:00
tz21-date	datenum 1-31	Timezone 2 to 1 earliest date in month	25
tz21-day	day	Timezone 2 to 1 day of week of change	Sun
tz21-month	month	Timezone 2 to 1 month	Oct
tz21-time	duration	Timezone 2 to 1 local time of change	02:00:00

SNMP service settings

The SNMP service has general service settings and also specific attributes for SNMP such as community

snmp-service: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	List of IP ranges from which service can be accessed	Allow from anywhere
comment	string	Comment
community	string	Community string	public
local-only	boolean	Restrict access to locally connected Ethernet subnets only	false
log	string	Log events	Not logging
log-debug	string	Log debug	Not logging
log-error	string	Log errors	Log as event
port	unsignedShort	Service port	161
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number	0

System services

System services are various generic services that the system provides, and allows access controls and settings for these to be specified. The service is only active if the corresponding element is included in services, otherwise it is disabled.

services: Elements
Element	Type	Instances	Description
dns	dns-service	Optional	DNS service settings
http	http-service	Optional	HTTP server settings
ntp	ntp-service	Optional	NTP client settings (server not implemented yet)
platform-radius	platform-radius	Optional	Platform RADIUS server/proxy settings
snmp	snmp-service	Optional	SNMP server settings
telnet	telnet-service	Optional	Telnet server settings

SNMP trap logger settings

Logging by SNMP trap

log-snmp: Attributes
Attribute	Type	Description	Default
OID	string	OID to send	Not optional
comment	string	Comment
port	unsignedShort	Server port	25
profile	string	Profile name
server	IPNameAddr	SNMP server	Not optional
source	string	Source of data, used in automated config management
table	routetable 0-99	Routing table number for sending syslogs	0

Email logger settings

Logging to email

log-email: Attributes
Attribute	Type	Description	Default
comment	string	Comment
delay	duration	Delay before sending, since first event to send	PT1M
from	string	Source email address	One made up using serial number
hold-off	duration	Delay before sending, since last email	PT1H
log	string	Log emailing process	Not logging
log-debug	string	Log emailing debug	Not logging
log-error	string	Log emailing errors	Not logging
port	unsignedShort	Server port	25
profile	string	Profile name
retry	duration	Delay before sending, since failed send	PT10M
server	IPNameAddr	Smart host to use rather than MX
source	string	Source of data, used in automated config management
subject	string	Subject	From first line being logged
table	routetable 0-99	Routing table number for sending syslogs	0
to	string	Target email address	Not optional

Syslog logger settings

Logging to a syslog server

log-syslog: Attributes
Attribute	Type	Description	Default
comment	string	Comment
facility	syslog-facility	Facility setting	LOCAL0
port	unsignedShort	Server port	514
profile	string	Profile name
server	IPNameAddr	Syslog server	Not optional
severity	syslog-severity	Severity setting	NOTICE
source	string	Source of data, used in automated config management
source-ip	IPAddr	Use specific source IP
table	routetable 0-99	Routing table number for sending syslogs	0

Log target controls

Named logging target

log: Attributes
Attribute	Type	Description	Default
comment	string	Comment
console	boolean	Log immediately to console
flash	boolean	Log immediately to slow flash memory (use with care)
jtag	boolean	Log immediately jtag (development use only)
name	string	Log target name	Not optional
profile	string	Profile name
source	string	Source of data, used in automated config management

log: Elements
Element	Type	Instances	Description
email	log-email	Optional, unlimited	Email settings
snmp	log-snmp	Optional, unlimited	SNMP settings (TBA)
syslog	log-syslog	Optional, unlimited	Syslog settings

Admin users

User names, passwords and abilities for admin users

user: Attributes
Attribute	Type	Description	Default
allow	List of IPNameRange	Restrict logins to be from specific IP addresses
comment	string	Comment
config	config-access	Config access level	full
full-name	string	Full name
level	user-level	Login level	ADMIN
name	username (string)	User name	Not optional
otp	string	OTP serial number
password	Password	User password	Not optional
profile	string	Profile name
source	string	Source of data, used in automated config management
table	routetable 0-99	Restrict login to specific routing table	0
timeout	duration	Login idle timeout (zero to stay logged in)	PT5M

Web links

Links to other web pages

link: Attributes
Attribute	Type	Description
comment	string	Comment
name	string	Link name
profile	string	Profile name
source	string	Source of data, used in automated config management
text	string	Link text
url	string	Link address

System settings

The system settings are the top level attributes of the system which apply globally.

system: Attributes
Attribute	Type	Description	Default
comment	string	Comment
contact	string	Contact name
css-url	string	Additional CSS for web control pages
dos-delay	unsignedInt	Interrupt DoS restoration counter, leave at default	2
dos-limit	unsignedInt	Interrupt DoS packet limit, leave at default	1000
fast-reboot	boolean	Debug - causes fast reboot on new code load
intro	string	Home page text
location	string	Location description
log	string	Log system events	Web logs
log-debug	string	Log system debug messages	Not logging
log-error	string	Log system errors	Web/Flash/console
log-eth	string	Log Ethernet messages	Console
log-eth-debug	string	Log Ethernet debug	Web/Console
log-eth-error	string	Log Ethernet errors	Web/Flash/console
log-panic	string	Log system panic messages	Web logs
log-stats	string	Log one second stats	Not logging
name	string	System hostname
nat64	IP6Prefix	IPv6 NAT6/4 mapping prefix
nat64-source	IP4Addr	IPv6 NAT6/4 return IPv4
soft-watchdog	boolean	Debug - use only if advised; do not use on an unattended FireBrick	false
source	string	Source of data, used in automated config management
sw-update	autoloadtype	Load new software automatically	factory
sw-update-profile	string	Profile name for when to load new s/w

system: Elements
Element	Type	Instances	Description
link	link	Optional, unlimited	Home page links

Type of ring when one call in queue

Tag	Description
all	All phones
cascade	Increasing number of phones
sequence	One phone at a time

Order of ring

Tag	Description
strict	Order in config
random	Random order
cyclic	Cycling from last call
oldest	Oldest used phone first

Number presentation format

Tag	Description
international	Full international number
int-no-plus	International without leading plus
national	With nat/int prefix
local	Internal extension number/local number
block	Do not use for calls

Firewall action

Tag	Description
continue	Continue rule-set checking
accept	Allow but no more rule-set checking
reject	End all rule checking now and set to send ICMP reject
drop	End all rule checking now and set to drop
ignore	End all rule checking and ignore (drop) just this packet, not making a session

BGP peer type

Peer type controls many of the defaults for a peer setting. It allows typical settings to be defined with one attribute that reflects the type of peer.

Tag	Description
normal	Normal BGP operation
transit	EBGP Mark received as no-export
peer	EBGP Mark received as no-export, only accept peer AS
customer	EBGP Allow export as if confederate, only accept peer AS
internal	IBGP allowing own AS
reflector	IBGP allowing own AS and working in route reflector mode
confederate	EBGP confederate
ixp	Internet exchange point peer on route server

Type of PPPoE connection

Tag	Description
client	Normal PPPoE client connects to access controller
bras-l2tp	PPPoE server mode linked to L2TP operation

BGP announcement mode

BGP mode defines the default advertisement mode for prefixes, based on well-known community tags

Tag	Description
false	Not included in BGP at all
no-advertise	Not included in BGP, not advertised at all
no-export	Not normally exported from local AS/confederation
local-as	Not exported from local AS
no-peer	Exported with no-peer community tag
true	Exported as normal with no special tags added

Control for RA and DHCPv6 bits

Tag	Description
false	Don't set bit or answer on DHCPv6
true	Set bit but do not answer on DHCPv6
dhcpv6	Set bit and do answer on DHCPv6

IPv6 route announce level

IPv6 route announcement mode and level

Tag	Description
false	Do not announce
low	Announce as low priority
medium	Announce as medium priority
high	Announce as high priority
true	Announce as default (medium) priority

Link fault type to send

Tag	Description
false	No fault
true	Send fault
off-line	Send offline fault (1G)
ane	Send ANE fault (1G)

PHY power saving options

Tag	Description
none	No power saving
link-down	Power save only when link is down
link-up	Power save only when link is up
full	Full power saving

LED settings

Tag	Description
Link/Activity	On when link up; blink when Tx or Rx activity
Link1000/Activity	On when link up at 1G; blink when Tx or Rx activity
Link100/Activity	On when link up at 100M; blink when Tx or Rx activity
Link10/Activity	On when link up at 10M; blink when Tx or Rx activity
Link100-1000/Activity	On when link up at 100M or 1G; blink when Tx or Rx activity
Link10-1000/Activity	On when link up at 10M or 1G; blink when Tx or Rx activity
Link10-100/Activity	On when link up at 10M or 100M; blink when Tx or Rx activity
Duplex/Collision	On when full-duplex; blink when half-duplex and collisions detected
Collision	Blink when collisions detected
Tx	Blink when Tx activity
Rx	Blink when Rx activity
Off	Permanently off
On	Permanently on
Link	On when link up
Link1000	On when link up at 1G
Link100	On when link up at 100M
Link10	On when link up at 10M
Link100-1000	On when link up at 100M or 1G
Link10-1000	On when link up at 10M or 1G
Link10-100	On when link up at 10M or 100M
Duplex	On when full-duplex

Physical port Gigabit clock master/slave setting

Tag	Description
prefer-master	Master status negotiated; preference for master
prefer-slave	Master status negotiated; preference for slave
force-master	Master status forced
force-slave	Slave status forced

Physical port flow control setting

Tag	Description
none	No flow control
symmetric	Can support two-way flow control
send-pauses	Can send pauses but does not support pause reception
any	Can receive pauses and may send pauses if required

Physical port duplex setting

Tag	Description
half	Half-duplex
full	Full-duplex
auto	Duplex determined by autonegotiation

Physical port speed

Tag	Description
10M	10Mbit/sec
100M	100Mbit/sec
1G	1Gbit/sec
auto	Speed determined by autonegotiation

Crossover configuration

Physical port crossover configuration.

Tag	Description
auto	Crossover is determined automatically
MDI	Force no crossover

Physical port

Tag	Description
1	Port 1
2	Port 2
3	Port 3
4	Port 4

Options for controlling platform RADIUS response priority tagging

Tag	Description
equal	All the same priority
strict	In order specified
random	Random order
calling	Hashed on calling station id
called	Hashed on called station id
username	Hashed on full username
user	Hashed on username before @
realm	Hashed on username after @
prefix	Hashed on username initial letters and numbers only

Day name (3 letter)

Tag	Description
Sun	Sunday
Mon	Monday
Tue	Tuesday
Wed	Wednesday
Thu	Thursday
Fri	Friday
Sat	Saturday

Month name (3 letter)

Tag	Description
Jan	January
Feb	February
Mar	March
Apr	April
May	May
Jun	June
Jul	July
Aug	August
Sep	September
Oct	October
Nov	November
Dec	December

Syslog facility

Syslog facility, usually used to control which log file the syslog is written to.

Tag	Description
KERN	Kernel messages
USER	User level messges
MAIL	Mail system
DAEMON	System Daemons
AUTH	Security/auth
SYSLOG	Internal to syslogd
LPR	Printer
NEWS	News
UUCP	UUCP
CRON	Cron deamon
AUTHPRIV	private security/auth
FTP	File transfer
12	Unused
13	Unused
14	Unused
15	Unused
LOCAL0	Local 0
LOCAL1	Local 1
LOCAL2	Local 2
LOCAL3	Local 3
LOCAL4	Local 4
LOCAL5	Local 5
LOCAL6	Local 6
LOCAL7	Local 7

Syslog severity

Log severity - different loggable events log at different levels.

Tag	Description
EMERG	System is unstable
ALERT	Action must be taken immediately
CRIT	Critical conditions
ERR	Error conditions
WARNING	Warning conditions
NOTICE	Normal but significant events
INFO	Informational
DEBUG	Debug level messages
NO-LOGGING	No logging

User login level

User login level - commands available are restricted according to assigned level.

Tag	Description
NOBODY	Unknown or not logged in user
GUEST	Guest user
USER	Normal unprivileged user
ADMIN	System administrator
DEBUG	System debugger

Type of access user has to config

Tag	Description
none	No access unless explicitly listed
view	View only access (no passwords)
read	Read only access (with passwords)
full	Full view and edit access

Type of s/w auto load

Tag	Description
false	Do no auto load
factory	Load factory releases
beta	Load beta test releases
alpha	Load test releases

Basic types

Type	Description
ses-id	[unsignedShort] Local session ID (1-250)
tun-id	[unsignedShort] Local tunnel ID (1-20)
cug	[unsignedShort] CUG ID (1-32767)
dates	[datenum] Set of dates
routetableset	[routetable] Set of routetables
prefix4list	[IP4Prefix] List of IPv4 Prefixes
userlist	[username] List of user names
protolist	[unsignedByte] List of IP protocols
portlist	[PortRange] List of protocol port ranges
iprangelist	[IPRange] List of IPranges
ping-size	[unsignedInt] Data payload size to be sent in ping packet (0-1472)
fb105-reorder-maxq	[unsignedInt] Maximum size of out of order packet queue (1-100)
fb105-reorder-timeout	[unsignedInt] Maximum time to queue out of order packet (ms) (10-5000)
bgp-prefix-limit	[unsignedInt] Maximum prefixes accepted on BGP session (1-1000)
filterlist	[IPFilter] List of IP Prefix filters
communitylist	[Community] List of BGP communities
unsignedIntList	[unsignedInt] List of integers
aslist	[unsignedIntList] List of AS numbers
prefixlist	[IPPrefix] List of IP Prefixes
ip4list	[IP4Addr] List of IPv4 addresses
macprefix	[hexBinary] MAC prefix
macprefixlist	[macprefix] List of strings
ip4rangelist	[IP4Range] List of IP4ranges
vlan	[unsignedShort] VLAN ID (0=untagged) (0-4095)
mtu	[unsignedShort] Max transmission unit (576-1600)
ip6list	[IP6Addr] List of IPv6 addresses
ra-min	[unsignedShort] Route announcement min interval (seconds) (3-1350)
ra-max	[unsignedShort] Route announcement max interval (seconds) (4-1800)
subnetlist	[IPSubnet] List of subnets
iplist	[IPAddr] List of IP addresses
stringlist	[string] List of strings
datenum	[unsignedByte] Day number in month (1-31)
ipnamelist	[IPNameAddr] List of IP addresses or domain names
routetable	[unsignedByte] Route table number (0-99)
ipnamerangelist	[IPNameRange] List of IPranges or ip groups
username	[string] Login name
Secret	Secret/passphrase
Colour	#rgb #rrggbb #rgba #rrggbbaa colour
PortRange	xxx-xxx port range
Community	xxx:xxx community
Password	Password
IPFilter	Route filter
IPSubnet	IP address / bitlen
IP6Prefix	IPv6 address / bitlen
IP4Prefix	IPv4 address / bitlen
IP4Range	IPv4 address / bitlen or range
IPNameRange	IP address / bitlen or range or name
IPRange	IP address / bitlen or range
IPPrefix	IP address / bitlen
IP6Addr	IPv6 address
IP4Addr	IPv4 address
IPNameAddr	IP address or name
IPAddr	IP address
void	Internal use
time	HH:MM:SS time
dateTime	YYYY-MM-DDTHH:MM:SS date/time
duration	Period
boolean	Boolean
unsignedByte	unsigned byte integer (0-255)
byte	byte integer (-128-127)
unsignedShort	unsigned short integer (0-65535)
unsignedInt	unsigned integer (0-4294967295)
positiveInteger	positive integer (1-4294967295)
integer	integer (-2147483648-2147483647)
hexBinary	hex coded binary data
string	text string